5
Peugeot 207
Heater Unit Installation Location
1 Heater unit
Installation
location
1
1
Preliminary Work
WARNING!
- Disconnect the battery.
- Let off pressure in the cooling system.
- Copy the factory number from the original type label to the duplicate type label.
- Remove years that do not apply from the duplicate label.
- Attach the duplicate label (type label) in the appropriate place.
- Completely remove the battery.
- Completely remove the air filter with intake hose.
- Open the tank cap, ventilate the tank.
- Close the tank cap again.
- Remove the left underride protection
- Open the tank mounting service lid
- Remove tank mounting according to manufacturer's instructions.
- Remove the panel on the middle tunnel in the left footwell.
- Remove the lower left dashboard panel.
- Remove the air conditioning control (only for automatic air conditioning systems)
- Please remove page 29 “Operating instructions for the end customer” and add this to the vehicle
operating instructions.
To Next Page
Loading...
Need help?
General
