Peugeot 207
Webasto AG
Postfach 80 - 82132 Stockdorf - Hotline 0 18 05 / 93 22 78
Hotfax (0395) 55 92-353 - http://www.webasto.de
Feel the drive
Final Work
WARNING!
Reassemble disassembled components in reverse order.
Check that all hose lines, hose, spring band clamps and universal clips, and all electrical connections
are securely fastened.
Secure all loose lines using cable clip.
Only use manufacturer-approved coolant.
Spray heating unit components with anti-corrosion wax (Tectyl 100K, Order No. 111329).
- Connect battery.
- Start engine, bleed coolant circuit according to the vehicle manufacturer's specifications, top up
with coolant.
- Set the time switch.
- Set the manual air conditioning or automatic air conditioning according to the "operating
instructions for the end customer".
- Check that the auxiliary heating operates properly, see operating instructions / installation
instructions.
- Attach the "Switch off auxiliary heating before re-fuelling" sticker onto the left side of the B-pillar.
i
Printed in Germany 06/06 Printed by: Steffen
To Next Page
Loading...
Need help?
General
