Webasto Thermo & Comfort SE
Postfach 1410
82199 Gilching
Germany
Internet: www.webasto.com
Technical Extranet:
http://dealers.webasto.com
Ident. No.: 1325133C_EN Status: 09.06.2017 © Webasto Thermo & Comfort SE
54
VW Golf VII / Golf VII Sportsvan / Passat and Skoda Superb
Final Work
Reassemble the components in reverse order. Check all hoses, clamps and all electrical connec-
tions for firm seating. Insulate and tie back loose lines.
Only use manufacturer-approved coolant. Spray the heater components with anti-corrosion wax
(Tectyl 100K).
• Connect the battery.
• Fill and bleed the coolant circuit according to the vehicle manufacturer’s instructions.
• Program MultiControl CAR, teach Telestart transmitter.
• For initial startup and function check, please see installation instructions.
• If the fan function or A/C control panel settings need to be checked, see the installation
documentation in the additional kit ‘Webasto Standard’ or ‘Webasto Comfort’ A/C con-
trol, section ‘Final Work’.
• Place the ‘Switch off parking heater before refuelling’ caution label near the filler neck.
Align exhaust outlet 3 with centre of pass
through.
1 Wheel well trim installed
2 Underride protection installed
Aligning ex-
haust pipe
To Next Page
Loading...
