Display settings 40 Markoprint Integra Vivid
Page 37 of 45 GB
Status Item at right side
In this menu the status display can be changed. E.g. from speed to prints/sec, prints/min
and prints/hour.
Maximum value for right item
In this menu the maximum value of the right status display can be changed. E.g.: for a
conveyor belt, using a rotary encoder, that can reach up to 30 m/min, the maximum value
is set to 30.
Or a production machine that can reach up to 500 prints per minute, the maximum value
is set to 500.
The changes made are shown on the right side of the display
To Next Page
Loading...