Print Head settings 40 Markoprint Integra Vivid
Page 29 of 45 GB
Select the desired setting by tapping.
Nozzle row
The setting of the nozzle rows is only possible for using HP or LX print heads.
Each HP- or LX- ink cartridge has two nozzle rows (A and B). One nozzle row has 150
nozzles.
The nozzles in row A print the uneven numbers 1, 3, 5, 7.
The nozzles in nozzle row B print the even numbers 2, 4, 6, 8.
When printing with one nozzle row, A or B, alternately with each second vertical nozzle
is printed at 300dpi. In this mode, the nozzles are uniformly stressed and the speed
setting is not as critical as with A + B.
If, for instance, using A ~ B, every second print image is of poor quality, nozzle row A; or
nozzle row B can be activated. To print with the good nozzle row only.
Abb. 7-1: Düsenplatte Tintenkartusche
If A + B is set, the print simultaneously with all nozzles in both nozzle rows is printed.
The speed must be synchronized exactly, so that the ink drops lay exactly one upon the
other. Otherwise a shadow is on the print image.
To Next Page
Loading...