Safety Instructions .
14 | ECW500
3 SAFETY INSTRUCTIONS
This manual contains information necessary for the proper use of the voltage regulator ECW500.
It has been written to be used by qualified personnel with suitable training or technical qualification for operating
this type of equipment.
3.1 SAFETY WARNINGS IN THE MANUAL
The following safety notices are used in the manual:
DANGER!
The procedures recommended in this warning have the purpose of protecting the user against
death, serious injuries and considerable material damage.
ATTENTION!
The procedures recommended in this warning have the purpose of avoiding material damage.
NOTE!
The information mentioned in this warning is important for the proper understanding and correct
operation of the product.
3.2 SAFETY WARNINGS IN THE PRODUCT
The following symbols are attached to the product, serving as safety notices:
High voltages are present.
Components sensitive to electrostatic discharge.
Do not touch them.
Mandatory connection to the ground (PE conductor).
To Next Page
Loading...
