Ethernet Communication (Modbus TCP) .
62 | ECW500
8 ETHERNET COMMUNICATION (MODBUS TCP)
The ECW500 has support for 10 and 100 Mbps Ethernet connections, Half or Full Duplex, in Modbus TCP
protocol. For a correct communication and operation, parameters 30258 to 30280 must be configured
according to the network, as well as parameters 31218 (port), 31220 (Id) and 31222 (timeout). Parameter 31232
defines whether Dynamic Configuration Protocol (DHCP) is enabled or not.
For more information about the Ethernet network, refer to the specific Ethernet manual.
To Next Page
Loading...
