Functional Description .
ECW500 | 31
6 FUNCTIONAL DESCRIPTION
6.1 PARAMETER STRUCTURE IN HMI
In order to facilitate the setting and monitoring tasks, the ECW500 parameters are arranged in groups divided
into up to four different levels, as is shown in Table 6.1.
The initial screen displayed by the HMI of the ECW500 after the initialization shows the main variables of the
synchronous machine, in addition to the regulator status and the current operating mode.
Figure 6.1 Initial screen displayed by the HMI of the ECW500
From this screen, after pressing the right menu key, the first level of the group structure is shown on the display,
and it is possible navigate through other groups using the keys .
Full navigation tree to all screens is illustrated in Figure 6.2.
To Next Page
Loading...
