WEG ECW500 - Page 40

Functional Description .
32 | ECW500
Table 6.1 Parameter group structure of the ECW500 V1.3X
Level 0
Level 1
Level 2
Level 3
Level 4
Main
Measures
Screen
Main
Measures
General Screen
Machine Voltage/Current
Machine Power
Machine Field
ECW Power Module
Aux. Inputs/Outputs
Control Variables
Limiters Status
Digital I/O Status
Dig. Input Status p1
Dig. Input Status p2
Dig. Output Status
OS/FW Information
Control Config
Operating Modes
Setpoints Config
Setpoints
Setpoints Max/Min
Control Gains
MTVC Gains
MECC Gains
MRPC Gains
MPFC Gains
Limiters
LUF-Underfrequency
LEOC-Exc. Overcurrent
LEUC-Exc. Undercurrent
LEUC-PxQ Points
LTOC-Term. Overcurrent
Soft Start Config
Protections
PFL-Feedback Loss
PEOV-Field Overvoltage
PEOC-Field Overcurrent
PED-Excitation Diodes
PEL-Excitation Loss
Power Module
PTOV-Term. Overvoltage
PTUV-Term. Undervoltage
System Rated Param.
Machine Parameters
Current Transformer
Voltage Transformer
ECW Configuration
Digital Inputs
Transition Type 1-6
Transition Type 7-13
Other Configuration
Digital Outputs Relays
Status Relay
General Failure Relay
Relay 0 page 1 and 2
Relay 1 page 1 and 2
Relay 2 page 1 and 2
Relay 3 page 1 and 2
Analog Input
Analog Output
HMI
Auto Calibration
Time and Date
Password
Communication
RS-485 / RS-422
Anybus
Anybus Status
Anybus Configuration
Mapped Parameters
Ethernet
IP Address/Mask/Gate
Modbus Node
Ethernet Status
MAC Address
Autotuning
Command Screen
Dual Channel Mode
1
Event List
1
Feature not available on this version.