Wega EVDS io - 8.5 Cleaning Operations; 8.5.1 General Cleaning Instructions; 8.5.2 Filter and Filter-Holder Cleaning; 8.5.3 Dispensing Group Cleaning

42
User manual
8.5 Cleaning operations
8.5.1 General instructions
A few simple cleaning tasks are required to have a per-
fectly sanitised and ecient appliance. The instructions
provided here apply when the machine is being used
on a regular basis. If the machine is used consistently,
cleaning should be performed more frequently.
Do not use alkaline cleaners, solvents, alcohol or aggressive
substances. The products/cleaners used must be suitable for this
purpose and not corrode the water circuit elements.
Do not use abrasive cleaners which may scratch the bodywork’s
surface.
Always use clean and sanitised cloths when cleaning.
When washing the filters, filter holders and all machine
components, use Manufacturer-supplied cleaners or products
specic for cleaning professional coee machines.
Cleaning
Daily
Weekly
Body and Grilles:
Clean the panels of the body with a cloth dampened in
lukewarm water.
Remove the drip tray and cup holder grille and wash with
hot water.
X
Filter and lter holder:
Wash the lters and lter holders daily and weekly, as
indicated in par. 8.5.2.
Perform cleaning operations daily as indicated in para-
graph 8.5.5 page 43
X X
Steam nozzle:
Keep the nozzle clean at all times using a cloth dampened
in lukewarm water.
Check and clean the nozzle tips, by clearing the steam
outlet holes with a small needle.
Wash these on a weekly basis, as indicated in par. 8.5.6
page 43.
X X
Dispensing group:
Wash the dispensing group as described in par. 8.5.4
Carry out an internal cleaning on a weekly basis, as speci-
ed in par. 8.5.3 .
Perform cleaning operations daily as indicated in para-
graph 8.5.5 page 43
X X
Grinder-dispenser and Hopper
Clean the hopper and the dispenser inside and out with a
cloth dampened with warm water.
When nished, dry all parts thoroughly.
X
8.5.2 Filter and lter-holder cleaning
Daily:
• Soak the lter and lter-holder in hot water overnight
so that the fatty coee deposits can dissolve;
• rinse with lukewarm water.
Weekly:
• Use a screwdriver to de-
tach the lter from the
lter holder;
• soak the lter and lter
holder in warm water
and cleaning agent for
10 minutes;
• rinse with lukewarm water.
Caution: Only immerse the lter holder cup, avoid soaking the
handle in water.
The detergent must be diluted in cold water in the doses indicated
on the package (see manufacturer).
8.5.3 Dispensing group cleaning
We also recommend cleaning the dispensing group
with a blind lter holder containing a specic coee
cleaning product. The procedure to follow is described
below:
• Place a tablespoon (3-5 g) of the cleaning product in
a blind capsule holder;
• Attach the capsule holder to the dispensing group;
• Start dispensing manually;
• Wait ten seconds;
• Stop dispensing;
• Repeat steps 3, 4 and 5 at least 5 times;
• Remove the capsule holder and rinse with clean water.
8.5.4 Perforated disk cleaning
Weekly perform the cleaning of the perforated disk
in the following way:
• Remove the seal
(1) by
levering it with a screw-
driver, being careful not
to damage it;
• remove the perforated
disk
(2) and wash it with
hot water;
• place the perforated disk
and seal back to the origi-
nal position.
1
2