To Next Page

To Previous Page

Technical manual

ENGLISH

NERO

C:0 M:0 Y:0 K:100

ROSSO

C:0 M:100 Y:100 K:0

VERDE

C:100 M:0 Y:100 K:0

3.4 Conversion from TANK to WATER MAINS

1GR Version

Through this procedure you can change the type

of water supply of the machine, from internal Tank to

Water Mains.

All operations must be performed by technical

personnel only.

• Unplug the machine from the power supply.

• remove the water tank;

• remove the screws, and then remove the top cover

and the body of the machine;

• set switch (A) placed on the right side of the machine

to "0";

• turn the knob (B) clockwise to end of stroke, so that

its direction is the one shown in the picture;

• replace the body of the machine using the screws;

• replace the water tank;

• hook the hose (C) supplied to the quick coupling

placed under the machine;

• connect the hose to the water supply and open the

tap (D), make sure that the system pressure is about

1 bar;

• connect the cable to the power supply and turn on

the machine.

C CD

Wega Mininova Use And Maintenance Manual For The Technician

Other manuals for Wega Mininova