Wega Mininova - Conversion from WATER MAINS to TANK 1 GR Version

20
NERO
C:0 M:0 Y:0 K:100
ROSSO
C:0 M:100 Y:100 K:0
VERDE
C:100 M:0 Y:100 K:0
3.5 Conversion from WATER MAINS to TANK
1GR Version
Through this procedure you can change the type
of water supply of the machine, from Water Mains to
internal Tank.
All operations must be performed by technical
personnel only.
• Unplug the machine from the power supply.
• close the tap (D) and disconnect the hose from the
water supply;
• unhook the hose (C) from the quick coupling placed
under the machine;
• remove the water tank;
• remove the screws, and then remove the top cover
and the body of the machine;
• turn the knob (B) counter-clockwise to end of stroke,
so that its direction is the one shown in the picture;
• set switch (A) placed on the left side of the machine
to "1";
• replace the body of the machine using the screws;
• replace the water tank;
• ll the internal tank with potable water;
• connect the cable to the power supply and turn on
the machine.
A
B
C CD
A