Wega MyConcept EVDP 2GR - Parameter Programming; Access; Access by USB stick

27 of 76
TECHNICIANS manual
ENGLISH
8. PARAMETER PROGRAMMING
This paragraph deals with the programming menu
that allows the user to program the various functions
of the machine.
All these operations are performed using the touch-
screen display.
8.1 Access
Programming can be accessed in two ways:
• by USB stick.
• by password.
Access by password does not allow some functions oered by the
USB stick, such as updating, loading and/or saving the data.
12
8.1.1 Access by USB stick.
• Insert the USB stick into the port (12);
• select the bar on the right side of the display;
• select the menu key
;
• select the service conguration key
.
The USB port must only be used with the specic stick provided to
Qualied Technicians. Do not connect external devices (iPhone,
iPad, PC, etc.) to the USB port because it could create serious
problems in the machine software.