30 of 76
TECHNICIANS manual
8.3 Maintenance report
In this section you can view the following data:
• maintenance cycles type A;
• maintenance cycles type B;
• maintenance cycles type C;
• Water consumption (liters);
• grinder wear (kg);
• energy saved (kWh).
To reset the data, select the button
.
To program the date to request assistance for the
machine, i.e. when the display indicates the need to
proceed with the scheduled maintenance, press the
button
. Use the buttons and , or the
display keyboard
, to enter the desired date.
To switch from one page to another, select the key
.
Reset data
To Next Page
Loading...
