TECHNICIANS' manual
- English -
10 di 52
2.4 Intended use
The espresso coee machine has been designed to profession-
ally prepare hot beverages such as tea, cappuccinos and weak,
strong and espresso coee, etc. The appliance is not intended
for domestic use, it is intended for professional purposes only.
The machine can be used under all the conditions set forth,
contained or described in this document; any other conditions
must be considered dangerous. The machine must be installed
in a place where its access is restricted to qualified personnel
only who have received suitable training (coee shops, restau-
rants, etc.).
Permitted uses
All uses compatible with the technical features, operations
and applications described in this document which do not en-
danger the safety of users or can cause damage to the ma-
chine or its surrounding environment.
All uses not specifically mentioned in this Manual are
prohibited and must be expressly authorised by the
Manufacturer.
Intended uses
The machine has been designed exclusively for professional
use. The use of products/materials other than those specified
by the Manufacturer, which can cause damage to the machine
and be dangerous for the operator and/or those in close prox-
imity to the Machine, is considered incorrect or improper.
Contraindications of use
The machine must not be used:
• for uses other than those indicated in this paragraph or for
uses that dier from or are not mentioned in this Manual.
• with materials other than those listed in this Manual.
• with safety devices that have been disabled or are not
working.
Incorrect use of the machine
The type of application and performance that this machine
has been designed for, requires a number of operations and
procedures that cannot be changed, unless previously agreed
with the Manufacturer. All permitted behaviours are indicated
in this document; any operation not listed and described here-
in is to be considered improper and therefore, hazardous.
Improper use
The only permitted uses are described in the Manual; any oth-
er use is considered improper and therefore, hazardous.
General safety features
The Technician must be aware of accident risks, safety devices
and the general safety rules set forth in EU directives and by
the legislation of the country where the machine is installed.
The Technician must know how all the machine's devices work.
They must also have fully read and understood this Manual.
Maintenance work must be performed by the Technician after
the machine has been properly prepared. The tampering or un-
authorised replacement of one or more machine components,
the use of accessories which modify its use and the use of
materials other than those recommended in this Manual, can
cause accidents.