TECHNICIANS' manual
- English -
20 di 52
3. TRANSPORT AND HANDLING
3.1 Safety precautions
Carefully read the instructions provided in chapter
"I. SAFETY PRECAUTIONS" on page 3.
3.2 PPE features
When transporting the machine, the following PPE is required:
The use of protective gloves is mandatory.
The use of safety shoes is mandatory.
3.3 Dimensioni e peso
Modello 2GR 3GR
Peso lordo
massimo
80 kg 90 kg
3.4 Handling the packed machine
Upon arrival, the machine must be unloaded and handled with
care, carefully following the instructions on the packaging, or
those contained in this Manual.
It is very important to check that the maximum
load capacity of each piece of lifting equipment, is
at least equal to the weight of the loads to be lifted
plus the safety margins which are required by current stand-
ards.
3.5 Unpacking the machine
Only remove the machine from its packaging when it is ready
to be installed, in order to prevent accidental collisions which
could damage it:
• Open the packaging, taking care not to damage the ma-
chine.
• Remove and take out the machine guards and equipment
inside the packaging.
• Remove the machine.
• Dispose of the packaging in compliance with the current
waste regulations.
After unpacking the machine, check that there are
no damaged parts due to transport or missing
parts. Should there be any, immediately inform (no
later than 7 days after delivery) both the CARRIER and the
MANUFACTURER, by indicating the machine data and pro-
viding photographic evidence.
We recommend that you keep the packaging until the guar-
antee has expired.
Wood, nails, staples, cardboard: non-polluting material
which must be recycled properly.
Plastic: polluting material that must not be burned (danger
of toxic fumes), nor disposed of as normal waste; to be dis-
posed of according to current regulations.
To Next Page
Loading...
Need help?
General
