TECHNICIANS' manual
- English -
31 di 52
7. MAINTENANCE AND CLEANING
7.1 Safety precautions
Carefully read the instructions provided in chapter "I. SAFETY PRECAUTIONS" on page 3.
7.2 PPE features
When maintaining and cleaning the machine, the following PPE is required:
The use of protective gloves is mandatory.
7.3 Bodywork removal
If it is necessary to carry out maintenance operations inside
the machine, remove the panels correctly to avoid damaging
them.
7.3.1 Upper grille removal
To remove the top grille correctly, proceed as follows:
• Turn the machine o.
• Loosen the 2 screws (A) and remove them.
• Remove the grille (B) from its seat.
• Once the maintenance operations have been completed,
reposition the grille (B) in its original position by perform-
ing the operations in reverse.
Do not carry out maintenance work when the machine
is running.
A
B
7.3.2 Removing the side panels
Proceed as follows:
• Turn the machine o;
• Loosen the 4 screws (A) and remove them.
• Remove the side panel (B) .
• Once the maintenance work has been carried out, reposi-
tion the side panel (B) in its original location by carrying out
the steps in reverse order.
Do not carry out maintenance work when the machine
is running.
A
B
To Next Page
Loading...
Need help?
General
