WeighTech WT3000-P - Page 18

WEIGHTECH USA Weighing indicator WT3000-IR ABS– Technical manual
Wt3000irabs v20151126
18
rS1-03
Transmission
format
configuration
F-m 0
Display value transmission
F-m 0
F-m 1
Gross weight transmission
F-m 2
Net weight transmission
F-m 3
Display value (simple format)
F-m 4
Gross weight transmission (simple format)
F-m 5
Net weight transmission (simple format)
F-m 6
Hi, Lo or OK Status and Display value (simple format)
F-m 7
Hi, Lo or OK Status and Gross weight transmission (simple format)
F-m 8
Hi, Lo or OK Status and Net weight transmission (simple format)
F-m 9
Tare value transmission
F-m 10
Number of accumulations, date, time, gross weight, tare, net weight
(The total accumulated weight is sent only when the memory is
erased) also compatible with Epson TM-U295 and TM-U220.
F-m 11
Date, time, gross weight, tare, net weight (The total accumulated
weight is sent only when the memory is erased) also compatible
with Epson TM-U295 and TM-U220.
F-m 12
Big score format (only for use with DR-WT 75, 125 and 200)
F-m 13
Printer format (only for Zebra CG420 and Elgin L42)
F-m 14
Stability status gross weight, tare, net weight and unit
F-m 15
Live animal weighing format. (for use with tag reader and printer)
rS1-04
Transmission
mode
configuration
ComAnd
Parameter
ComAnd
StrEAn
Continuous transmission
Auto
Auto transmission
rS-oFF
Disable serial transmission
n_PLuS
Accumulation mode
rS1-05
Transmission
rate setting
rPS 1
1 transmission per second
rPS 4
rPS 2
2 transmissions per second
rPS 4
4 transmissions per second
rPS 8
8 transmissions per second
rPS 16
16 transmissions per second
mAx
Maximum transmission rate
rS1-06
Minimum weight
for automatic
transmission
Zb – 00
to
Zb - 99
Set the minimum number of divisions for auto transmission of a weight
value.
• Important: when this value is equal to 0 the automatic transmission
will be disabled.
Zb – 05
rS1-07
Auto
transmission
reset
V-b 00
to
V-b 99
Set the minimum number of divisions to reset the auto transmission of a
weight value.
V-b 00