Weinmann Oxygen MODULE User Manual

2
Contents
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . 4
1. Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2. Description . . . . . . . . . . . . . . . . . . . . . . . . . . 6
2.1 Uses . . . . . . . . . . . . . . . . . . . . . . . . . . 6
2.2 Module combinations . . . . . . . . . . . . . . . 6
2.3 Storage . . . . . . . . . . . . . . . . . . . . . . . . 6
3. Final Check . . . . . . . . . . . . . . . . . . . . . . . . . . 7
3.1 Test resources required . . . . . . . . . . . . . . 7
3.2 Preparations for final check . . . . . . . . . . . 7
3.3 Entering device data . . . . . . . . . . . . . . . 7
3.4 Check for leaks in the system . . . . . . . . . . 7
3.5 Checking inhalation function . . . . . . . . . . 9
3.6 Testing vacuum . . . . . . . . . . . . . . . . . . . 9
3.7 Checking aspiration function . . . . . . . . . 10
4. Servicing . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
4.1 Intervals . . . . . . . . . . . . . . . . . . . . . . . 11
4.2 Servicing . . . . . . . . . . . . . . . . . . . . . . 11
4.3 Disposal . . . . . . . . . . . . . . . . . . . . . . . 12
5. Troubleshooting . . . . . . . . . . . . . . . . . . . . . . 12
6. Repair information and repair instructions . . 13
6.1 General . . . . . . . . . . . . . . . . . . . . . . . 13
6.2 Oxygen MODULE . . . . . . . . . . . . . . . . 13
6.2.1 Replacing the sieve in the
oxygen inlet . . . . . . . . . . . . . 13
6.2.2 Replacing the O-ring in the
oxygen outlet . . . . . . . . . . . . 14
6.2.3 Dismantling the housing . . . . . 14
6.2.4 Assembling the housing . . . . . 16
6.2.5 Replacing the non-return valve
in the distributor block . . . . . . 19
6.2.6 Replacing the pressure gauge . 20
6.2.7 Replacing the tubes . . . . . . . . 21
6.2.8 Replacing the toggle switch . . 22
6.2.9 Replacing the quick-release
coupling . . . . . . . . . . . . . . . 22
6.2.10 Replacing O-ring of Walther
coupling . . . . . . . . . . . . . . . 23
6.2.11 Replacing the pressure regulator
( MODULE Oxygen: up to Device
No. 1616; MODULE Combi:
up to Device No. 1075;
MODULE Suction: up to
Device No. 1010) . . . . . . . . 24
6.2.12 Replacing the pressure regulator
( MODULE Oxygen: from Device
No. 1617; MODULE Combi:
from Device No. 1076;
MODULE Suction: from
Device No. 1011) . . . . . . . . 24
6.3 Suction MODULE . . . . . . . . . . . . . . . . . 26
6.3.1 Replacing the sieve in the
oxygen inlet . . . . . . . . . . . . . 26
6.3.2 Replacing the O-ring in the
oxygen outlet . . . . . . . . . . . . 26
6.3.3 Dismantling the housing . . . . . 26
6.3.4 Assembling the housing . . . . . 26
6.3.5 Replacing the non-return valve
in the distributor block . . . . . . 27
6.3.6 Replacing the pressure gauge . 27
6.3.7 Replacing the tubes . . . . . . . . 27
6.3.8 Replacing the toggle switch . . 28
6.3.9 Replacing the quick-release
coupling . . . . . . . . . . . . . . . 28
6.3.10 Replacing the pressure regulator 28
6.4 Combi MODULE . . . . . . . . . . . . . . . . .29
6.4.1 Replacing the sieve in the
oxygen inlet . . . . . . . . . . . . . 29
6.4.2 Replacing the O-ring in the
oxygen outlet . . . . . . . . . . . . 29
6.4.3 Dismantling the housing . . . . . 29
6.4.4 Assembling the housing . . . . . 29
6.4.5 Replacing the non-return valve
in the distributor block . . . . . . 30
6.4.6 Replacing the pressure gauge . 30
6.4.7 Replacing the tubes . . . . . . . . 30
6.4.8 Replacing the toggle switch . . 30
6.4.9 Replacing the quick-release
coupling . . . . . . . . . . . . . . . 30
6.4.10 Replacing the pressure regulator 31
6.5 Interface MODULE. . . . . . . . . . . . . . . .32
6.5.1 Replacing the sieve in the
oxygen inlet . . . . . . . . . . . . . 32
6.5.2 Replacing the O-ring in the
oxygen outlet . . . . . . . . . . . . 32
6.5.3 Dismantling the housing . . . . . 32
6.5.4 Assembling the housing . . . . . 32
6.5.5 Replacing the non-return valve
in the distributor block . . . . . . 33
6.5.6 Replacing the pressure gauge . 33
6.5.7 Replacing the tubes . . . . . . . . 33
6.5.8 Replacing the quick-release
coupling . . . . . . . . . . . . . . . 34
7. Spare parts . . . . . . . . . . . . . . . . . . . . . . . . . 35
7.1 Spare parts list . . . . . . . . . . . . . . . . . .35
7.2 Spare parts required for servicing . . . . . .37
8. Tools and test equipment . . . . . . . . . . . . . . . 39
8.1 General tools . . . . . . . . . . . . . . . . . . .39
8.2 Special tools. . . . . . . . . . . . . . . . . . . .39
8.3 Test equipment . . . . . . . . . . . . . . . . . .40
9. Technical data . . . . . . . . . . . . . . . . . . . . . . . 41
9.1 External oxygen flow volume . . . . . . . . .42
9.2 Oxygen flow volume from inhalation
connection . . . . . . . . . . . . . . . . . . . . .42
9.3 Aspiration efficiency. . . . . . . . . . . . . . .43
10. Technical Changes . . . . . . . . . . . . . . . . . . . . 44
© Copyright Weinmann GmbH & Co. KG.
The content and presentation are copyright protected and may only be used by authorised Weinmann Service Partners in the
course of their service operations. The content must not be reproduced or passed on to third parties. The complete documents
must be returned on termination of the cooperation with Weinmann.

Weinmann Oxygen MODULE Specifications

General

Brand	Weinmann
Model	Oxygen MODULE
Category	Medical Equipment
Language	English