Weinmann Oxygen MODULE - Combi Module Repair; Replace Combi Inlet Sieve; Replace Combi Outlet O-ring; Dismantle Combi Module Housing

Combi MODULE 29
6.4 Combi MODULE
6.4.1 Replacing the sieve in the oxygen inlet
See ”6.2.1 Replacing the sieve in the oxygen inlet“ on page 13.
6.4.2 Replacing the O-ring in the oxygen outlet
See ”6.2.2 Replacing the O-ring in the oxygen outlet“ on page 14.
6.4.3 Dismantling the housing
See ”6.2.3 Dismantling the housing“ on page 14, with one exception:
Re: Combi MODULE has two toggle switches:
6.4.4 Assembling the housing
See ”6.2.4 Assembling the housing“ on page 16, with two exceptions:
1. Re: step 4.:
Combi MODULE only requires one blind
plug 35.
2. Re: step 11.:
As Combi MODULE has two toggle switches,
please use a guide pipe over both toggle swit-
ches when mounting the upper housing
section 15.
35
15
20