– visual inspection for mechanical damage
– filter change
– cleaning the device
– replacement of any defective parts
– complete check of device functions and pressure displays
– battery change
– change of internal battery
– final check in accordance with test instruction WM 27104
– testing the power supply failure alarm
9.6 Disposal
9.6.1 Device
Do not dispose of the device with domestic waste. To
dispose of the device properly, contact a licensed,
certified electronic scrap disposal merchant. This address
is available from your Environment Officer or from your
local authority.
9.6.2 Batteries
Do not dispose of batteries with domestic waste. To
dispose of batteries properly, contact a licensed, certified
electronic scrap disposal merchant This address is
available from your Environment Officer or from your
local authority.
9.6.3 Oxygen sensor
Do not dispose of the oxygen sensor with domestic
waste, as it contains electrolyte and lead. It should be
disposed of in accordance with applicable national or
regional regulations.
To Next Page
Loading...
