5.7 LIAM info
Note
A detailed explanation of the LIAM function can be found in the section entitled
“5.10 LIAM (insufflation)” on page 58.
1. In the patient menu, use the dial to select the LIAM
info menu item.
2. Confirm your selection by pressing the dial.
You will find the following values and their residual
running times under LIAM info:
• Duration
• Interval
• Cycles
• Plateau signal (activated or deactivated)
5.7.1 Activate/deactivate plateau signal
In patient mode you can switch the plateau signal on or
off under LIAM info:
1. In the LIAM info menu, use the dial to select the
plateau signal.
2. Confirm your selection by pressing the dial.
3. Use the dial to select the status plateau signal on
or plateau signal off .
4. Confirm your selection by pressing the dial.
To Next Page
Loading...
Need help?
General
