44 Chapter 4 Reviewing the ECG Settings Welch Allyn CP 200 Electrocardiograph
Reviewing the Patient Data Fields Available for Auto Reports
You can determine which fields appear during patient data entry for Auto ECGs.
To Choose the Fields
1. Press the Menu key .
2. Choose ECG Settings > Edit Auto Report 1 (or 2) > Patient Data.
The following screen appears.
Figure 28. “Patient Data” Screen for ECGs
3. Change any desired settings.
Disabled items (set to
off or no) neither display nor print.
Note
Spirometry tests use a separate set of data-entry fields, as described in the
spirometry manual.
Field Description
First Name Yes or no. If yes, this field is enabled.
Middle Initial Yes or no. If yes, this field is enabled.
Age/Birth Date Birth Date, age, or off. Determines whether and how this data is labeled and entered. If
you’ll be testing patients from 1 day through 17 years old, select Birth Date for most
accurate results. If “age” is selected, age will be entered in years and months.
Weight Yes or no. If yes, this field is enabled for entering patients’ weight. For instructions on
changing the weight units (kg or lb), see
“Reviewing the Device Configuration Settings”
on page 29.
Height Yes or no. If yes, this field is enabled for entering patients’ height. For instructions on
changing the height units (cm, in., or ft and in.), see
“Reviewing the Device Configuration
Settings”
on page 29.
Gender Yes or no. If yes, this field is enabled. Data-entry choices: Male, Female, or Unknown.
Race Yes or no. If yes, this field is enabled. Data-entry choices: Blank, Caucasian, Black,
Hispanic, Asian, Unknown.
Patient Data
1 First Name
2 Middle Initial
3 Age/Birth Date
4 Weight
5 Height
6 Gender
7 Race
8 Medication
9 History
A Blood Pressure
9:17AM Oct 16 08
The Patient ID and Last Name fields always
appear on the Enter New Patient screen, as
shown in
Figure 37 on page 57. Since these two
fields cannot be disabled, they do not appear
on this user-selectable list.
To Next Page
Loading...
