INITIAL INSTALLATION
18
Electrical preparations:
A clearly labeled emergency switch shall be provided as part of the installation. The switch shall be readily accessible to the
occupants and shall be installed at least 5 feet (1.52 m) away, adjacent to, and within sight of, the unit.
Before installation the spa, the ellectrical system has to be prepared, as detailed in the below table.
Applicable cable:
Copper 90°C (194°F)
THHN/THWN
Ampere rating of the supply circuit
overcurrent protective device
AWG rating of the supply conductor
Mont Blanc (Elbrus 230) 50A 6
Monte Rosa (Kilimanjaro) 50A 6
Monte Bianco (Discovery) 40A 6
London (Malaga 2018) 40A 6
Paris (Elbrus 2018) 40A 6
Berlin (Marbella 2018) 35A 6
Rome (Manhattan2018) 35A 6
Milano (Palermo 2018) 40A 6
To Next Page
Loading...
