OPTIONAL ACCESSORIES IN.TOUCH 2
65
LED
Each in.touch 2 module has a status LED that can be used for troubleshooting purposes. The LED is located on the top
of both enclosures.
Home Transmitter
Pairing mode
Yellow (Blinking)
Router not detected Red
Router detected Green
in.touch 2 server detected
Module is fully functional Blue
Spa Transmitter
Pairing mode
Yellow (Blinking)
Spa controller not detected
Red
in.touch 2 server detected
Module is fully functional Blue
* When the LED status is blinking (blue, green or red) this
indicates that the communication between the EN module
and the CO module it not established.
status
LED
status
LED
To Next Page
Loading...
