SPA STATE
This page displays all the active states of your spa. Below is a quick
description of each state you may encounter on your spa. Each state is
associated to a priority and color that determines the color of the widget
on the home page.
Indicates that there is an error on your spa.
Indicates that there is presently an active user demand on your spa (ie.
pump, blower or light is on).
Indicates that your spa is now heating to your set point.
Indicates that your spa is now in a filtering cycle.
Indicates that your spa is now in economy mode.
Indicates that your spa is running normally (there is no user demand,
heating, no filtration or economy active).
The widget on the home page displays a single color at a time. The color dis-
played is decided by priority of state. The established priority is as listed above.
CHANGE TEMPERATURE
Touch the centered widget to reveal the temperature control bar.
Use the slider on the control bar to change your spa’s temperature* set point.
* If you are in economy mode your spa temperature will be 20°F below your set
point.
OPTIONAL ACCESSORIES IN.TOUCH 2
71
To Next Page
Loading...
