INTRODUCTION
HOW THE IN.CLEAR WORKS
When sodium bromide (such as BromiCharge) is added to
the water, it separates into sodium ions and bromide ions. As
the water passes through the in.clear bromine generator, a
low-voltage source supplies a current that electrolytically re-
duces the bromine ions into bromine. The bromine destroys
bacteria and algae, and then releases bromide ions back into
the water for continuous recycling until the spa is emptied. It
is important to note that the amount of bromine needed will
vary in direct proportion to the number of bathers in the spa
(bather load).
VERSIONS
There are two versions of the in.clear module: a stand alone
version that uses the in.k200 keypad directly, and the linked
version, which communicates with the spa pack for more
control and precision.
EFFECTS OF BROMINE
• Bromine destroys waterborne bacteria.
• Bromine destroys algae in water (e.g. Black, Green, Mus-
tard).
• Bromine swiftly eliminates the presence of organic matter
left behind by spa users (e.g. oil, sweat, dead skin cells).
• Because bromine doesn’t contain calcium, it can be used
to sanitize hard water without increasing the calcium hard-
ness.
BROMINE IN A SPA
Bacteria require a certain period of time before forming
into micro colonies and becoming attached to a surface.
Rapid elimination of bacteria is a key element in the proper
maintenance of the spa water. The in.clear achieves this while
oxidizing odors, reducing eye and skin irritation. The in.clear
enhances the clarity and quality of spa water. For bathers
this translates into a more enjoyable warm water therapy
experience.
OPTIONAL ACCESSORIES IN.CLEAR
49
To Next Page
Loading...
