CHOOSE A SPA
This page displays all the spas detected by your application.
To detect your spa, you need to connect your mobile device to the same
network to which you connected your Home Transmitter.
Once you have done a connection with the spa its name will be saved on this
page to allow you to connect to this spa from anywhere.
To add a spa later on, go to p. 26 of this techbook for instructions. The RF
signal strength (communication between the two in.touch 2 transmitters) is
illustrated on the Select a spa page. There are 5 possibile states:
• Signal superior to 80%
• Signal between 80% and 51%
• Signal between 50% and 31%
• Signal below 30%
• The Spa Transmitter is not available
HOME PAGE
The main screen gives you access to your accessories, water temperature, water care and settings.
Spa name
Accessories control
line
Water Care
menu
Reminders menu
Indicates current spa water temperature. Color varies
according to most important active state. Touch to
change set point
Message center that indicates status of your spa: heat-
ing, filtration, error... if you click on the message center
you will access the Spa state page
Settings menu
Account setting
OPTIONAL ACCESSORIES IN.TOUCH 2
70
To Next Page
Loading...
