SSH
SSH is the abbreviation for Secure Shell and is an encrypted service comparable to Telnet.
Configuration
For each service it is possible to select whether it should be activated or deactivated and on which IP address this
service may be addressed.
To do this, simply check or uncheck Enable. Under Port the TCP port for the respective service can be selected.
With ACL Enable an access restriction can be set up for each port. If ACL Enable is activated, you can enter in the
Source Range and IP Wildcard fields which IP address or IP address ranges are allowed to access the router via this
port. For SSH, you can also define the Timeout for an SSH session to the router.
If there is no activity during the timeout period, the connection is terminated. Under Key Mode and Key Length the
encryption standard and the key length can be selected.
Via Other Parameters you can set the Web login timeout. This specifies how long a web interface session remains
if no input is made.
If the timeout time has expired without any input, then the logged in user will be logged out automatically.
Welotec GmbH
Zum Hagenbach 7
48366 Laer
www.welotec.com
info@welotec.com
+49 2554 9130 00
Page 29
To Next Page
Loading...
