3.1.5.1. Radius
Radius stands for Remote Authentication Dial‑In User Serviceandisaclient‑server protocol used for authentication,
authorization and accounting.
You can enter the FQDN or IP address of the server, the port, the key for the Radius server and the source interface
here.
3.1.5.2. Tacacs+
Tacacs+ stands for Terminal Access Controller Access Control System and is a client‑server protocol used for au‑
thentication, authorization and accounting.
It is used for client‑server communication between AAA servers and a Network Access Server (NAS).
You can enter the corresponding data here at Server Address, Port and Key.
3.1.5.3. LDAP
LDAP stands for Lightweight Directory Access Protocol and is suitable for querying and modifying information from
directory services. LDAP is based on the client‑server model.
Enter the data for your LDAP server here.
Welotec GmbH
Zum Hagenbach 7
48366 Laer
www.welotec.com
info@welotec.com
+49 2554 9130 00
Page 32
To Next Page
Loading...
