Welotec TK800 - Page 70

GPS
IP For‑
ward‑
ing List
Type Selection between client and server
Proto‑
col
Here you can choose between the protocol types TCP or UDP.
Con‑
nection
Type
Selection between long‑lived and short‑lived is possible. Standard is Long‑lived
Keepalive
Interval
Entry between 60 and 180 seconds possible. Default = 100s.
Keepalive
Retry
The number of repetitions here may be between 5 and 10 times. Standard = 10
Min
Recon‑
nect
Interval
Min. reconnection interval between 15 and 180 seconds. Default = 15s.
Max
Recon‑
nect
Interval
Min. reconnection interval between 180 and 3600 seconds. Default = 180s.
Source
Inter‑
face
Selection of the corresponding interface that is to be redirected to
Trap In‑
terval
The interval may be between 1 and 86400 seconds. Default = 30
Include
RMC
Recommended minimum data set. When selected, the minimum of the GPS receiver is output
Include
GSA
Active satellites. Information about PRN numbers of the satellites whose signal is used for position
determination is output here.
Include
GGA
Most important data set with time, position, height and quality of the measurement
Include
GSV
Visible satellites. Provides information about satellites that can possibly be received at present and
information about their position, signal strength, etc. Since only the information of four satellites
can be transmitted per record (limitation to 82 characters), there can be up to three such records
Mes‑
sage
Prefix
Input of a message prefix possible. Free input
Mes‑
sage
Suix
Input of a message suix possible. Free input
Welotec GmbH
Zum Hagenbach 7
48366 Laer
www.welotec.com
info@welotec.com
+49 2554 9130 00
Page 69