EasyManua.ls Logo

Whirlpool CS2320 - Defrost Mode Operation; Preheat Mode Operation

Whirlpool CS2320
48 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Defrost Mode
Defrost chilled or frozen food with steam. Always ensure that the water tank is lled before using this mode.
Temperature Time
Default Setting 55℃ 30 mins
Setting Range 50℃ - 60℃ 5 mins - 6 hours and 59 mins
Example: Set the cooking time to 1 hour and 40 minutes; defrosting temperature is 60°C.
Steps:
1. In standby mode, turn the knob clockwise to
Defrost Mode. The icon will ash. Press the knob to conrm (as shown
in the diagram below). The display will jump to hour setting automatically.
2. Turn the knob until the hour display shows 01. Press the knob to conrm (as shown in the diagram below). The display will
jump to minute setting automatically.
3. Turn the knob until the minute display shows 40. Press the knob to conrm (as shown in the diagram below). The display
will jump to temperature setting automatically.
4. Turn the knob until the temperature display shows 60°C. Press the knob to conrm (as shown in the diagram below).
5. Setting is complete. The combi steamer will start cooking (as shown in the diagram below).
Preheat Mode
The Preheat Mode can be operated with steam or baking mode. The oven will be heated to preset temperature.
Steam Preheating Baking Preheating
Temperature Temperature
Default Setting 100℃ 180℃
Setting Range 50℃ - 110℃ 100℃ - 230℃
Oven will automatically adjust the cooking time according to set temperature. “END” will be displayed and an audio tone will
be heard when the temperature reaches the preset temperature. Current time is displayed during preheating. Always ensure
that the water tank is lled before using steam preheating.
Example: Set the steam preheating temperature to 100°C.
Steps:
1. In standby mode, turn the knob clockwise to
Preheat Mode. The icon will ash. Steam is the default setting.
Press the knob to conrm (as shown in the diagram below).
2. The display will jump to temperature setting automatically. Press the knob to conrm the default temperature 100°C
(as shown in the diagram below).
3. Setting is complete. The combi steamer will start preheating (as shown in diagram below).
72 73
Operation Instructions
Operation Instructions
S48893-Whirlpool Combi Steamer User Manual_EN_V12.indd 72-73 26/7/2016 下午12:55

Related product manuals