Whirlpool CS2320 - Keep Warm Mode Operation; Cavity Drying Mode Operation

■
Keep Warm Mode
Keeping food warm with hot air. Suitable for keeping cooked dishes warm.
Temperature Time
Default Setting 55℃ 30 mins
Setting Range 50℃ - 60℃ 5 mins - 3 hours and 59 mins
Example: Set the cooking time to 1 hours and 30 minutes; cooking temperature is 60°C.
Steps:
1. In standby mode, turn the knob clockwise to
Keep Warm Mode. The icon will ash. Press the knob to conrm
(as shown in the diagram below). The display will jump to hour setting automatically.
2. Turn the knob until the hour display shows 01. Press the knob to conrm (as shown in the diagram below). The display will
jump to minute setting automatically.
3. Press the knob to conrm the “30” minute setting (as shown in the diagram below). The display will jump to temperature
setting automatically.
4. Turn the knob until the temperature display shows 60°C. Press the knob to conrm (as shown in the diagram below).
5. Setting is complete. The combi steamer will start cooking (as shown in the diagram below).
■
Cavity Drying Mode
In this mode, the oven is heated to a high temperature so any excessive moisture and steam are evaporated. This function is
used for drying the oven after any steam cooking modes.
Temperature Time
Default Setting Cannot be adjusted 25 mins
Setting Range Cannot be adjusted Cannot be adjusted
Steps:
1.
In standby mode, turn the knob clockwise to Cavity Drying Mode. The icon will ash. Press the knob to conrm (as
shown in the diagram below).
2. The combi steamer will start cooking (as shown in the diagram below).
Important:
1. The function of “Combination Button: Cavity temperature display” is not available in this mode.
2. The function of “Adjust or Increase the Cooking Time during/after Cooking is Completed” is not available in this mode.
76 77
Operation Instructions
Operation Instructions
S48893-Whirlpool Combi Steamer User Manual_EN_V12.indd 76-77 26/7/2016 下午12:55