Whirlpool CS2320 - Adjust Cooking Time During;After Cooking

■
Adjust or Increase the Cooking Time during/after Cooking is Completed
A. Adjust the cooking time during cooking process
You can extend or shorten the cooking time and the temperature as required during the cooking process.
Example: Change the cooking time and temperature settings from 01:40 and 90°C to 02:00 and 100°C.
Steps:
1. During cooking, press the knob to interrupt and pause the cooking. The time display will ash (as shown in the diagram
below).
2. Press the setting button . The display will go to the reset cooking time screen automatically. The hour digit ashes,
and the “Extended Cooking Time” icon lights up on the display (as shown in the diagram below).
3. Turn the knob until the hour display shows 02. Press the setting button
to conrm (as shown in the diagram below).
The display will jump to minute setting automatically.
4. Turn the knob until the minute display shows 00. Press the setting button
to conrm (as shown in the diagram below).
The display will jump to temperature setting automatically.
5. Turn the knob until the temperature display shows 100°C. Press the knob to conrm (as shown in the diagram below).
6. Setting is complete. Cooking will be resumed with new settings (as shown in the diagram below).
B. Increase the cooking time after cooking is completed
You can increase the cooking time after cooking is completed. Temperature cannot be adjusted.
When cooking is completed, the “END” will be shown on display and an audio tone sounds. The
“Extended Cooking
Time” icon will light up on the display and the
“drip tray cleaning reminder” icon will ash for 3 minutes. (Note: the drip
tray cleaning reminder icon will light up only if the steam mode has been in operation) (As shown in the diagram below).
To increase the cooking time, follow the steps below:
Example: Cooking is completed and need to increase the cooking time by 3 minutes.
Steps:
1. Press the knob to conrm to increase the cooking time, the display will jump to minute setting automatically.
2. Turn the knob until the minute display shows 03. Press the knob to conrm (as shown in the diagram below).
3. Setting is complete. Cooking will resume with added cooking time under previous settings (as shown in the diagram
below).
Temperature Time
Setting Range Cannot be adjusted 1 – 59 mins
Note: If no action is taken within 3 minutes after cooking is completed, the combi steamer will return to standby mode.
82 83
Operation Instructions
Operation Instructions
S48893-Whirlpool Combi Steamer User Manual_EN_V12.indd 82-83 26/7/2016 下午12:55