C
Universal Pressure Transmitter UniTrans
Operation of Transmitters with Display
Published 16.2.04
Subject to change due to technical modifications. © Copyright WIKA Alexander Wiegand GmbH & Co. KG / BRD
WIKA Alexander Wiegand GmbH & Co. KG · Alexander-Wiegand-Str. · 63911 Klingenberg ·
(09372) 132 - 710 · Fax - 706 · E-mail: support-tronic@wika.de · www.wika.de
67
6.5.1 Main Menu: Display
see chapter 2.1.3
display unit
*) The density of a medium must
be entered to calculate the correct
fill-level when displaying or adju-
sting the level in height units (e.g.
mm, m, feet, inch) (see 6.5.6). For
ranges which require over 4 digits
see 2.1.3
**) For volume-based units it is
necessary to enter the reference
value (100% = 0.0,
value range 0 ... 3000).
*)
mbar
bar
PSI
at
kg/cm²
mA
%
mm
m starting with soft-
inch ware version 1.05
feet
Pa
hPa
kPa
MPa
mmWS
mWS
mmHG
**)
l
kg
t starting with soft-
m³ ware version 1.05
gal
lb