WIKA UniTrans UT-10 User Manual

Published 16.2.04
C
Universal Pressure Transmitter UniTrans
Product Description
Subject to change due to technical modifications. © Copyright WIKA Alexander Wiegand GmbH & Co. KG / BRD
WIKA Alexander Wiegand GmbH & Co. KG · Alexander-Wiegand-Str. · 63911 Klingenberg ·

(09372) 132 - 710 · Fax - 706 · E-mail: support-tronic@wika.de · www.wika.de
46
2.1.2 Processing Unit
The processin
g
unit, which is inte
g
rated in the housin
g
contains the terminal compart-
ment and the ke
y
pad used for pro
g
rammin
g
the transmitter. The four ke
y
s must be
activated (unlocked) before use. Durin
g
normal operation the ke
y
pad is locked to pro-
tect data and functions previousl
y
entered. The ke
y
pad is automaticall
y
locked when
no ke
y
is hit for 10 minutes. The processin
g
unit converts the di
g
italized si
g
nal from
the measurin
g
unit into a standard 4...20 mA current si
g
nal.
2.1.3 Display Unit
The indicator has four di
g
its (7-se
g
ment displa
y
) + s
y
mbols. Below it, line 1 (16-se
g
-
ment displa
y
) is used to displa
y
error codes and the si
g
nal’s unit of measure. The unit
of measure can be selected b
y
the operator. Measurements over 9999 can not be cor-
rectl
y
displa
y
ed. Please note this when choosin
g
the unit (e.
g
. 9999 Pascal = 0,09999
bar). Additional information is displa
y
ed in lines 2 and 3 (16-se
g
ment displa
y
). The
operator can enter commands in the pro
g
rammin
g
mode on the displa
y
unit b
y
means
of menu
g
uided, clear-text prompts.
Processing Unit
CALIBRATION
RANGE

WIKA UniTrans UT-10 Specifications

General

Brand	WIKA
Model	UniTrans UT-10
Category	Transmitter
Language	English