Winterhalter P50 - Washing; Switching Off

Operation
9
8.3 Washing
Caution
Possible risk of scalding from hot lye-mixed water
 Keep children away from the dishwasher. The lye-mixed water is at a temperature of approx.
62 °C (HighTemp: 66 °C).
 Do not open the hood while the machine is washing. There is a risk of hot lye-mixed water
spilling out. Wait until the wash cycle is finished before doing so.
Possible risk of injury
 During operation the hood becomes hot. Therefore, only grasp the hood by the handle.
 Arrange sharp, pointed utensils so that they do not cause injury.
Risk of damage
 Do not use the dishwasher to wash electrically heated devices or parts made of wood.
 Do not wash parts made of plastic if they are not heat and lye-resistant.
 Use a suitable detergent to wash parts made of aluminium such as jars, containers or plates
in order to prevent black stains.
8.3.1 Preparing the dishes for washing
 Pre-rinse all dishes and pans with cold water.
 Remove food residues and pour out drink resi-
due.
 Soak dried residues.
 Soak cutlery till it is rinsed.
 Light plastic parts may slip or turn when wash-
ing. Ensure such parts are weighted down.
8.3.2 Starting a wash cycle with the automatic hood start
 Choose a washing programme ( 5.2).
INFO The washing programme remains selected until a different washing programme is chosen.
 Proceed in accordance with the following figures:
IMPORTANT Make sure that the rotating wash fields can turn freely.
8.3.3 End of the programme
The display flashes green, as soon as the washing programme has ended and the hood remains unopened.
8.3.4 Changing the washing programme
 Select a new washing programme by pressing the or button.
 The symbol for the washing programme appears in the display.
 Close the hood.
 The washing programme is started.
8.3.5 Prematurely terminating a wash cycle
A wash cycle can be terminated prematurely by pressing the or button.
8.4 Switching off
Switch the machine off at the end of the working day using the self-cleaning programme so that it is cleaned
and emptied every day ( 9.1.2).
INFO If you use the On/Off switch, the tank stays filled but will no longer be kept at temperature. If the
tank temperature has dropped too much before the machine is switched on again, the tank will be
emptied automatically and filled again.
green
blue