Wittenstein LUC+125 - Maintenance Schedule; Lubricant Notes; Disposal

Lubricator Operating manual
Revision: 02
2022-D064493
en-34
9.3 Maintenance schedule
Maintenance tasks During start-up
After 500 operating
hours or three months
Annually
Visual inspection and
cleaning
x x x
Check the tightening
torques
x x x
Table 3: Maintenance schedule
9.4 Notes on the lubricant used
The lubricant may differ depending on the application. The lubricant used is specified
on the type plate of the lubricator.
Further information on the lubricants can be obtained directly from WITTENSTEIN alpha.
9.5 Disposal
• Observe the safety data sheets and disposal instructions when disposing of the lubricator and
dispose of it along with the empty cartridges and batteries in accordance with the applicable
national regulations.
NOTE
Empty cartridges cannot be refilled.
Do not charge the batteries.