2. Stay on the Single tab. There are three tabs to
select from: Single, Multi, and Array.
Opening Size
1. Enter 5x7 (approx. 13x18 cm) for width and height of the
opening.
NOTE: The Outside size eld will display on the top if Edit
Opening Size First is unchecked in the Admin > Defaults.
Optionally, enter the outside dimensions rst.
Borders
1. Enter 2 (approx. 5 cm) for the bottom, top and side
mat border widths.
Outside Size
1. Make sure outside size is 9x11 (approx. 23x28 cm).
Don’t Click OK yet.
If opening size and borders are entered rst, the program
automatically calculates the outside size when tabbing out
of the borders eld.
14
Wizard™ International, Inc., 4600 116th St. SW, Mukilteo, WA 98275 888/855-3335 wizardcutters.com
20-34300-1A GettingStartedManual9K-70FrameShop
02/23/24
Wizard™ CMC Model 9000 Hardware and Software Getting Started Guide
To Next Page
Loading...