Wolf BMK - Fan Speed for Manual Mode; Pressure for Manual Mode; Flow Rate for Manual Mode; Fresh Air Proportion for Manual Mode

17
3062878_201707
9. Operating level 1
STANDARD SETTING
Prop. fresh air
for manual mode
DISPLAYSELECTIONEsc BACK
060 %
GE-09
Fresh air proportion for
manual mode
Pressing highlights the fresh air proportion that can then be adjusted in steps with
the keys.Finallyconrmtheselectedvaluewith .
Please note
The selected set fresh air proportion only applies to manual mode.
Pressing
highlights the fan speed that can then be changed with in steps of
0.1%.Finallyconrmtheselectedvaluewith .
Forventilationsystems,thepressureguresforventilationandextractairare
changed separately.
Please note
The selected fan speed only applies in manual mode.
Fan speed for manual mode
DISPLAYSELECTIONEsc BACK
STANDARD SETTING
Ventilation air speed
for manual mode
GE-03
020 %
Pressing highlights the set pressure that can then be changed with .
Finallyconrmtheselectedvaluewith .
For ventilation systems, the fan pressure for ventilation and extract air are changed
separately.
Please note
The selected set pressure only applies in manual mode.
Pressure for manual mode
GE-05
DISPLAYSELECTIONEsc BACK
STANDARD SETTING
Vent. air fan pressure
set value for
manual mode
0750.0 Pa
Pressing highlightsthesetowratethatcanthenbechangedwith .
Finallyconrmtheselectedvaluewith
.
Forventilationsystems,thesetowratesforventilationandextractairarechanged
separately.
Please note
Theselectedsetowrateonlyappliesinmanualmode.
Flow rate for manual mode
GE-07
DISPLAYSELECTIONEsc BACK
STANDARD SETTING
Vent.airowrate
set value for
manual mode
001500 m
3
/h
Pressing highlights the speed that can then be changed with .
Finallyconrmtheselectedvaluewith .
For ventilation systems, the speeds for supply and extract air for external demand are
changed separately.
Speed for external demand
GE-10
DISPLAYSELECTIONEsc BACK
STANDARD SETTING
Vent. air speed for
external demand
Stage 3: 100.0 %
Stage 2: 060.0 %
Stage 1: 030.0 %
Pressing highlights the set pressure that can then be changed with .
Finallyconrmtheselectedvaluewith .
For ventilation systems, the pressures for supply and extract air for external demand
are changed separately.
Pressure for external demand
GE-12
DISPLAYSELECTIONEsc BACK
STANDARD SETTING
Vent. air pressure for
external demand
Stage 3: 300 Pa
Stage 2: 200 Pa
Stage 1: 100 Pa