Wolf BMK - Hygrostat Function; Continuous Hygrostat Function; Quick Heating Function

20
3062878_201707
9. Operating level 1
STANDARD SETTING
Hygrostat function
active
(NO)
GE-27
DISPLAYSELECTIONEsc BACK
Hygrostat function
Pressing causes the hygrostat function to be enabled or, by pressing again, to
be disabled. For adjustment options and changes, see chapter Humidity control.
(Prerequisite: hygrostat available)
STANDARD SETTING
Const hygrostat
function active
(NO)
GE-28
DISPLAYSELECTIONEsc BACK
Continuous hygrostat function
Pressing causes the continuous hygrostat function to be enabled or, by pressing
again, to be disabled. For adjustment options and changes, see chapter Humidity
control. (Prerequisite: room or humidity extract air sensor available)
STANDARD SETTING
Quick heating function active
(NO)
GE-28
DISPLAYSELECTIONEsc BACK
Quick heating function
Pressing
allows the quick heating function to be enabled or, by pressing
again, to be disabled. For adjustment options and changes, see chapter
"Heating contractor menu" under "Air dampers".
Prerequisite:CRLdampersystemtted