Wood-mizer LT70 Series User Manual

Operation
Starting the Engine
Operation G28doc072321 1-4
1
 Check if the battery charge indicator, the oil pressure indicator (located on the HMI
display) and the EFI indicator are OFF. If not, stop the engine immediately.
For more information, see the engine manufacturer’s operation manual.
Engine Shut-off
 Set the blade drive switch to position 0.
 Let the engine run idle for 2 minutes to cool it down.
 Turn the key switch to position 0.

Wood-mizer LT70 Series Specifications

General

Hydraulic Log Handling	Optional
Computer Setworks	Optional
Blade Width	1.5 inches (3.8 cm)
Power Options	Electric or diesel
Head Controls	Manual
Cutting Method	Horizontal bandsaw