Operation
Starting the Engine
1
1-1 G28doc072321 Operation
SECTION 1 OPERATION
1.1 Starting the Engine
Engine Control Lights
See Figure 1-1. The following indicator lights are located on the sawmill control panel.
Battery Charge Indicator: It lights up if the alternator is not charging the battery
EFI Diagnostic Indicator: A diagnostic light is provided to help troubleshoot the electronic
fuel injection system. See Engine error screen
for details.
Blade Lube Indicator: It lights up/blinks if the blade lube is on.
FIG. 1-1
To Next Page
Loading...
