2.Selecting the Reverb type
Use the CURSOR to enter in. Then adjust te [SEARCH] dial to select one of the
8 Reverbs. The relative name appears in the screen. Also you can press [REVERB]
button until the arrow in the screen points to the Number Effect position.
3.Quit
Press [VOICE] button or select another Function to quit.
Notice:
Pressing both CURSOR buttons returns to the original Reverb setting.
Press the CURSOR to return to the former page, 'Reverb' and then select the
Chorus type.
Reverb Type:
This parameter determinates the output of the Reverb Effect
1.Selecting the Reverb Return Level
Press the FUNCTION button till the arrow points to the NUMBER EFFECT position.
Then select the RevRtnlv by the CURSOR buttons.
Notice:
This setting influences all the voices. Every voice of the reverb send Level ( including
Split & Dual) could be set separately.
Press both CURSOR buttons may return to the original setting of Reverb
return level(64).
2.Setting Return Level
Use the [SEARCH] dial to adjust.
3.Quit
Press the [VOICE] button or select another function to quit.
: 01:ROOM1 02:ROOM2
03:ROOM3 04:HALL1
05:HALL2 06:PLATE
07:DELAY 08:PANNING DELAY
Setting Reverb Return Level
CURSOR
MEMORY
MUL TIFUNCTION
DUAL VOICE
SPLIT MODE
HARMONY/ECHO
WHOLE FUNCTION
NUMBER EFFECT
S. NUMBER
VOICE
STYLE
24
To Next Page
Loading...