Worlde W8807A - Recalling the Registered Panel Setting; Accompaniment Freeze Function

RECALLING THE REGISTERED SETTING
*After select a Memory Bank, press the registration memory number button may recall
the corresponding parameter setting. The register number will appear in the screen at
the REGIST position. And the parameters will appear in the screen.
ACCOMPANIMENT FREEZE FUNCTION
* Under this function, recalling a memory number will not change the parameters of the
accompaniment. This will not disturb your performance, while using different memory settings
Press the [FREEZE] button to open/close the function. When this function is on, the
word FREEZE appears in the screen.
Notice:
Selecting different memory bank will not close the FREEZE function.
37
M1 M2 M3 M4 M5 M6 M7 M8
REGISTRATION MEMORY
REGISTRATION
/ MEMORY
B./S.
ACMP
TRACK1 TRACK2 TRACK4
TRACK3
TRACK5
RECORD
PLAY
/STOP
REPEAT
RECORD & PLAY
M1 M2 M3 M4 M5 M6 M7 M8
REGISTRATION MEMORY
REGISTRATION
/ MEMORY
B./S.
ACMP
TRACK1 TRACK2 TRACK4
TRACK3
TRACK5
RECORD
PLAY
/STOP
REPEAT
RECORD & PLAY
ACMP
FREEZE