EasyManua.ls Logo

Worlde W8807A - Melody Recording Preparation and Execution; Melody Recording Preparation; Recording Melody Tracks

Worlde W8807A
57 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
M1 M2 M3 M4 M5 M6 M7 M8
REGISTRATION MEMORY
REGISTRATION
/ MEMORY
B./S.
ACMP
TRACK1 TRACK2 TRACK4
TRACK3
TRACK5
RECORD
PLAY
/STOP
REPEAT
RECORD & PLAY
M1 M2 M3 M4 M5 M6 M7 M8
REGISTRATION MEMORY
REGISTRATION
/ MEMORY
B./S.
ACMP
TRACK1 TRACK2 TRACK4
TRACK3
TRACK5
RECORD
PLAY
/STOP
REPEAT
RECORD & PLAY
3.Entering into the Melody Track Recording Preparation
Press the [RECORD] button, and the light flashes. While REC appears at MELODY
1 position, it shows that it is ready. Use [SEARCH] dial to select another Melody Track.
Beat flashing shows the current tempo. If the BEAT function is on, it flashes by
the tempo.
Notice:
If the former recorded accompaniment track is on (the relative mark shows in the screen),
It could be monitored while recording. If you do not need the accompaniment, press the
FUNCTION button to the Song Track position and use the CURSOR to select the
Accompaniment track. Use the CURSOR to close it. Once you press the REC button, this
Keyboard will automatically select the USER SONG.
The melody track volume is the current volume of the keyboard.
Each time you could only record one Melody track.
Press the REC again to quit the record standby state.
After entering into the record standby, the keyboard will set the measure as 01. ( Not
From the pointed measure.)
4.Recording
Just play the keyboard or press the [PLAY/STOP] button to start recording. Time indicator
shows the current Time.
Notice:
Song recording will delete all the former data of the same track.
Recording proceeds by measures. If you stop between the measure, the rest will be
recorded as pause.
If the music Memory is full, the letter FULL will appear on the screen. The recording
Stops.
Only the Voice number (Voice function) shows in the Melody Track. ( No Dual)
39
2.Selecting the Voice and Setting the relative parameters
After selecting the voice, you can set the Effect and other parameters.
Notice:
You can not record in Split Mode. While preparing for recording, the keyboard
automatically selects the normal mode.
ACCOMP
MELODY
MELODY
1
2
REC
[ [
[[

Table of Contents