wtw pH 3310 - Example 1 on Navigation: Setting the Language

pH 3310 Operation
19
ba75802e02 12/2008
4.2.3 Example 1 on navigation: Setting the language
1 Press the <On/Off> key.
The measured value display appears.
The instrument is in the measuring mode.
2 Using <F1_>/[Menu] open the Storage & config menu.
The instrument is in the setting mode.
3 Select the System submenu with <▲><▼>.
The current selection is displayed with a frame.
4 Open the System submenu with <ENTER>.
pH
6.949
25.0 °C
22.09.2008
08:00
Menu
USB output
System
Data storage
Storage & config
22.09.2008
08:00
Back