wtw pH 3310 - Resetting the System Settings

Operation pH 3310
60
ba75802e02 12/2008
4.7.2 Resetting the system settings
The following system settings can be reset to the delivery status:
The system settings are reset in the menu, Storage & config / System
/ Reset. To open the Storage & config menu, press the <F1
_>/[Menu]
key in the measured value display.
Setting Default settings
Language English
Temperature unit °C
Beep On
Baud rate 4800 Baud
Output format ASCII
Contrast 50 %
Illumination On
Switchoff time 1 h