wtw pH 3310 - Display

pH 3310 Overview
7
ba75802e02 12/2008
1.2 Display
Function display
indicators
<ENTER>:
<ENTER
_>:
Opens the menu for measurement settings / confirms
entries
Opens the menu for system settings
<AR> Freezes the measured value (HOLD function)
Switches the AutoRead measurement on or off
ENTER
AR
1 Status information
2 Measured value (with unit)
3 Measured parameter
4 Continuous measurement control (CMC function)
5 Sensor symbol (calibration evaluation, calibration
interval)
6 Measured temperature (with unit)
7 Status line
8 Softkeys and date + time
HOLD AR
25.0
6.093
pH
°C
4
3
2
5
6
7
8
1
22.09.2008
08:00
Menu
Output to USB
AutoCal
e.g. TEC
Calibration with automatic buffer recognition, e.g.
with the buffer set: Technical buffers
ConCal Calibration with any buffers
Error An error occurred during calibration
LoBat Batteries are almost empty
AR Stability control (AutoRead) is active
HOLD Measured value is frozen (<AR> key)