wtw pH 3310 - Automatic Storage at Intervals

Operation pH 3310
52
ba75802e02 12/2008
4.5.2 Automatic storage at intervals
The storage interval (Interval) determines the chronological interval
between automatic storage processes. Each storage process transmits
the current dataset to the interface at the same time.
Configuring the
automatic storage
function
Settings You can configure the automatic storage function with the following
settings:
1 Press the <STO_> key.
The menu for automatic storage appears.
Adjusted entire storage
duration
Max. available storage
duration
Graphical display of the
storage usage
ID number 1
Interval 30 s
Duration 180 min
Continue
0d03h00min
0 1d17h33min
Automatic data storage
22.09.2008
08:00
Back
Menu item Possible
setting
Description
ID number 1 ... 10000 ID number for the dataset
series.
Interval 1 s, 5 s, 10 s,
30 s, 1 min,
5min, 10min,
15 min,
30 min, 60 min
Storage interval.
The lower limit of the
storage interval can be
restricted by the number of
free storage locations.
The upper limit is restricted
by the storage duration.